What is the difference between a baluster, a picket, and a spindle?

The terms are often used interchangeably, but there are subtle distinctions. A baluster is a vertical support member in a railing system, connecting the top rail to the bottom rail or floor surface. A picket is typically a flat or square bar version, commonly used in fence panels. Spindle is a general term, usually referring to turned or shaped vertical members. In ornamental iron work, all three styles serve the same structural and decorative purpose.

What building code governs baluster spacing?

The International Residential Code (IRC) requires that gaps between balusters must not allow a 4-inch sphere to pass through. On stair railings, because of the angle, the maximum opening is 4-3/8 inches. A practical rule of thumb is to place approximately three balusters per linear foot of railing to comfortably meet this requirement. Always confirm with your local building department, as some jurisdictions adopt amendments to the model code.

Can I use ornamental steel balusters for outdoor applications?

Solid steel balusters are well suited for both interior and exterior installations. For outdoor use, a quality powder coat finish is essential to protect against moisture and rust. Hollow balusters can be used outdoors when they are welded to metal top and bottom rails, which seals the interior from moisture accumulation. If hollow balusters will be used outdoors with non-welded connections, moisture can enter the tube and cause rust from the inside out — solid balusters are the safer choice in that scenario.

What is the difference between solid and hollow steel balusters?

Solid balusters are forged from mild steel and offer a slightly textured, old-world surface. They are more intricate in the designs they can hold, perform better outdoors, and have no flex. Hollow balusters are fabricated from higher-grade steel tubing, have a smooth surface, and are lighter — making them easier to cut, handle, and ship. Both meet building code strength requirements. Hollow balusters have become the industry standard for production work due to cost and ease of installation; solid is preferred for exterior, high-detail, or restoration projects.

Do balusters come in standard lengths, and can they be cut to size?

Yes. Ornamental iron balusters are sold in standard lengths and are designed to be cut down on the job site to match your specific rail height. Hollow balusters can be cut with a hacksaw or angle grinder with a metal cutting wheel. Solid balusters require a chop saw with a metal-cutting blade. Always cut from the bottom of the baluster to preserve the decorative top detail.

Does Superior Ornamental Supply offer wholesale pricing for contractors?

Yes. Superior Ornamental Supply serves both retail customers and wholesale trade accounts including ironworkers, welders, fence contractors, and fabricators. Contact us at (888) 525-1280 or info@superiorornamentalsupply.com for volume pricing information.

What does "forged" mean in relation to ornamental iron balusters?

Forged balusters are shaped under high heat and pressure using dies or presses, which compresses and works the steel into the desired form. This process can create smooth knuckles, tapered sections, collar details, or textured surfaces that would be impossible to achieve by bending alone. The result is a denser, more detailed surface compared to plain bar stock.

What design details are common on forged balusters?

Common forged details include knuckles (raised nodes pressed into the bar), tapered ends, cage formations, collar accents, and basketweave sections. Some forged bars have a fully smooth profile with elegant tapering, while others combine a hammered texture with forged decorative elements.

Are forged balusters suitable for contemporary or transitional designs?

Yes. Many forged baluster styles — particularly those with clean knuckles and minimal ornamentation — work well in transitional, Craftsman, and even modern-industrial design contexts. The key is selecting a forged style with restrained detail rather than heavily ornate scrollwork.

Can forged balusters be welded?

Yes. Solid forged balusters weld easily to steel top and bottom rails using MIG or TIG welding. Forged cast iron decorative elements require a different approach — cast iron can be welded with nickel-based rod or bonded with a structural metal epoxy for non-structural repairs. Confirm the material composition of your specific baluster with us if welding is a critical part of your installation.

Baluster SUI52-A-4S

Be the first to review this product

$17.65

In stock

SKU

SUI52-A-4S

Stair Picket 1/2" square bar on the ends scroll with large scrolls of 1/4" x 1/2" in the center

Height: 39 1/2"

This picket or baluster it is conformed of different ornamental scrolls attached together, large size scrolls in the center and square bars at the ends.

Skip to the end of the images gallery